Traffic Reconfiguration at Don Mills and Eglinton: Overnight Work October 18 – 19, 2017

Looking for information related to a specific area?

Choose an intersection from the drop down list to view the latest news and construction updates. Intersections are listed alphabetically (with Eglinton as the main cross-street).

 
October 18, 2017

What Work is Taking Place?

As part of the continued support of excavation works for the future Science Centre station, traffic staging at the intersection of Don Mills Road and Eglinton Avenue East will be changing as early as October 18, 2017.

Map of work zones around Eglinton Avenue and Don Mills Road

Hours of Work

  • Weather permitting, crews will adjust the traffic set-up on the following schedule:
  • Wednesday, October 18 at 7:00 PM, working overnight until Thursday, October 19 at 5:00 AM
  • Thursday, October 19 at 7:00 PM, working overnight until Friday, October 20 at 5:00 AM
  • A paid-duty Police Officer will be present during traffic set-up work.
  • The contractor may not always work during the permitted hours, but may do so at its discretion.
  • Work may be rescheduled due to weather conditions or unforeseen circumstances.
  • Once the traffic set-up is in place, it will remain for approximately four (4) months.

What to Expect

  • Minor adjustments to the traffic control barriers around the intersection will also be made, but all existing traffic lanes will remain the same. 
  • Nearby businesses and residents can expect noise from trucks and other construction equipment required to perform the work. 

Traffic Impacts

  • During the work zone set-up additional short duration lane closures will be required to safely conduct the work. 
  • Once, the set-up is complete traffic on Don Mills Road will be shifted to the east side of the roadway, south of Wynford Drive. 
  • A minimum of two through lanes of traffic in each direction will be maintained. Additional lane reductions during off peak hours may be required.
  • Southbound right turns will be prohibited (Don Mills southbound to Eglinton Ave westbound) for a couple of weeks during this stage of work. Signage will be placed to advise motorists when this restriction is in place.

Pedestrian Impacts

  • The east-west crosswalk on the north side of Eglinton Avenue will be closed. 
  • Pedestrian detours are clearly marked with signage directing pedestrians to the alternate routes.

TTC Impacts

  • The southbound bus stop on Don Mills Road will be moved further north on Don Mills Road.
  • The westbound bus stop on Eglinton Avenue East will remain on the west side of Don Mills Road.
  • TTC bus stops in the affected area may be relocated for the safety of transit riders. Please watch for posted signs indicating the adjusted locations.
  • Relocation and re-routing of bus stops is done in consultation between TTC and Metrolinx to ensure construction can continue safely while minimizing impact on the community and customers.

For more information, please contact Heather Glicksman at the East Community Office.

Thank you for your patience as we work to build this important project.

 Please support your local businesses during construction.